Use report of ZGM95-Ceramic insert Roller

  ZGM95G 立磨 - 陶瓷复合辊套 / 碾底衬板使用实例

the use of examples-MMC Mill Roller / liner (ceramic insert roller / liner)

•        物料 =4500 大卡煤（ HGI=60 ）      Material =4500 calories (hgi=60)

•        进料粒度 = 30-50mm              Feed size =30-50 mm

•        磨损形式 = 高应力碾碎式磨粒磨损   Wear form = high stress crushed abrasive wear (grinding abrasion)

•        使用者及设备 = 燃煤热电厂 ZGM95G 立磨辊套 / 碾底衬板   equipment = ZGM95 vertical mill for coal-fired thermal power plants

•        高铬铸铁辊套使用寿命 = 6000-8000 小时 每千小时磨耗 =10-15mm

•        The service life of high chromium cast iron roller sleeve =6000-8000 hours =10-15 mm per 1000 hours

•        DJM 高铬陶瓷复合辊套使用寿命 =15000-30000 小时 每千小时磨耗 =2-3mm

•         DJM high chromium ceramic composite roller sleeve service life =15000-30000 hours per 1000 hours wear =2-3 mm

•         

•        物料 = 水泥生料                     Materials = Cement Raw Materials

•        莫氏硬度 =6-7                     Moh hardness =6-7

•        进料粒度 = 30-50mm                Feed size =30-50 mm

•        磨损形式 = 高应力碾碎式磨粒磨损     Wear form = high stress crushed abrasive wear (grinding abrasion)

•        使用者及设备 = 水泥厂 ZGM95G 立磨辊套 / 碾底衬板 equipment = ZGM95 vertical mill for coal-fired thermal power plants

•        高铬铸铁辊套使用寿命 = 4500-5000 小时 每千小时磨耗 =15-18mm

•        DJM 高铬陶瓷复合辊套使用寿命 =8000-12000 小时 每千小时磨耗 =4-6mm