Location: Home > News > metal matrix ceramic composite liner

metal matrix ceramic composite liner

DJM Metal ceramic composite mill liner technology introduction

To improve its wear life of the liners, DJM adopts the composite material of High Cr cast iron( or Martensite steel) and ceramic, namely, the ceramic particles are casted into the surface of alloy to form a composition of ceramic-metal. Its ability of wear resistance is 3-4 times of high Cr Material, the thickness is 1/3 of the original one and can be manufactured according to the original wear curve, even the crack happens to some particles, it will not extend to the base material, thereby obtaining the capacity of high abrasion and impact resistance. The life span of Ceramic composite liner is more than two times of Mid-alloy liner, and more than 3-4 times of high manganese steel liner.

Product include:
High Cr cast iron + ZTA ceramic particles
Martensite steel + ZTA ceramic particles

Hits:  UpdateTime:2016-06-06 17:33:38  【Printing】  【Close
Pre Item:None
Next Item:None
  • Tel: 86-10-8890 9291/8890 9293 Fax: 86-10-8890 9288 Email: info@djm-bj.com
  • Room No.1403 TaiRan Building, No.36 GuSheng Road, ShiJingShan District, Beijing, China.100043
  • Copyright 2006-2018 DJM All Right Reservered. Report To Improve Product
  • MMC Mill part, MMC Impact bar, MMC Mantle, MMC Crusher part, Ceramic composite High Mn Steel, ceramic particules composite casting,ceramic Insert composite castings
Powered by  MetInfo  3.0 ©2008-2022  www.MetInfo.cn