MMC liner- Ceramic insert liner

高铬陶瓷复合铸造立磨（钢渣磨、水泥磨、磨煤机）辊套、碾底衬板，导向板等产品具有超高耐磨性能，平均磨损深度为每1000小时1-3mm；使用寿命是常规高铬产品的2倍以上。

陶瓷复合铸造衬板（MMC-衬板），广泛应用于球磨机、立式磨机（VRM）、自磨机/半自磨机、破碎机、溜槽、储料仓等设备耐磨部位。高铬陶瓷复合铸造衬板（MMC-Cr-衬板）具有高硬度，高耐磨性高铬复合铸造辊套及衬板的平均磨损深度为每1000小时2-3mm(高铬衬板每1000小时10-15mm）；高耐磨性高铬复合铸造导向板的平均磨损深度为每1000小时小于1mm；高耐磨性高铬复合铸造溜槽衬板的平均磨损深度为每1000小时10mm(高铬衬板每1000小时25-30mm）。

马氏体钢基陶瓷复合铸造衬板（MMC-M-衬板），MMC-M-衬板可焊接加工..耐磨板具有很好的焊接性能，同时承受较高的冲击.

MMC liner for Ball mill, Vertical mill (VRM), AG/SAG, Crusher, Chute, storage bin.

1, High Cr cast iron matrix ceramic composite casting liner ( MMC-Cr-Liner) ,
the MMC-Cr liner has high hardness, high wear resistance
The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours
(high-chromium roller and liner is 10-15mm per 1000 hours)
The average wear depth of the high-chromium composite casting Chute liner is 10mm per 1000 hours
(high-chromium Chute liner is 25-30mm per 1000 hours)

2, Martensite steel matrix ceramic composite casting liner ( MMC-M-Liner) ,
The MMC-M liner can be welded and machining.
The wear-resistant  plate has very good welding performance while bearing high impact.

Use Example of Ceramic insert liner of ZGM95 Vertical mill (max lose 23-26mm after 8700hour)
Material= Coal HGI=60
Feed size= 30-50mm
The average wear depth of the high-chromium composite casting roll sleeve and liner is 2-3mm per 1000 hours
(high-chromium roller and liner is 10-15mm per 1000 hours)